Dust-reduced machine sanding
Effective sanding with connected dust extraction removing splinters and roughness.
✨ Deck Sanding
Deck Sanding in Gothenburg
Gentle deck sanding removing splinters, grey surface layers, and unevenness to restore your deck’s natural timber finish. We also offer deck renovation including board replacement, washing, and oiling with ROT deduction.
- ✓ ROT deduction according to current regulations
- ✓ Valid liability insurance for peace of mind
- ✓ Free initial assessment
Dina Hantverkare i GBG AB
Göteborg · Mölndal · Partille · Kungsbacka
Scope of work
What we can help you with
Comprehensive craftsmanship handled by an experienced, fully insured team with personal communication and clear quotes.
Deck renovation & board replacement
Replacement of rot-damaged, cracked, or warped deck boards and screw tightening.
Deep timber cleaning
Gentle removal of algae, moss, mold spores, and deeply ingrained dirt.
Oiling & wood protection
Protective premium oil (clear or tinted) nourishing and shielding timber fibers.
Detailed information
Quality craftsmanship in every detail
A successful project requires thorough preparation, the right choice of materials, and skilled execution adapted to local Gothenburg conditions.
Restore the deck instead of building new
A weathered, splintery, and grey deck often appears in worse condition than it actually is. In most cases, joists and framing beneath are structurally sound. Through professional machine sanding, we remove the degraded top layer to reveal healthy, bright timber. When needed, we replace individual damaged boards and re-fasten loose screws. Restoring and sanding is faster, eco-friendly, and significantly more cost-effective than building new.
- ✓ Gentle sanding preserving healthy wood
- ✓ Repair and board replacement on site
- ✓ Sustainable, eco-friendly alternative to rebuilding
Wood treatment shielding against coastal weather
Following sanding, timber fibers are porous and absorbent. To ensure lasting protection, we saturate the decking with premium exterior timber oil or organosilicon treatment. The oil deeply penetrates the grain, shielding against water ingress, cracking, and algae growth through rainy autumns and sunny summers. Choose between natural golden tones or pigmented finishes.
- ✓ Penetrating wood oils with UV and anti-mold additives
- ✓ Silky, barefoot-friendly surface completely free of splinters
- ✓ ROT deduction handled directly on your invoice under current rules
How it works
A straightforward project in 4 steps
01
Free initial assessment
Share photos of your deck and approximate square meters. We return an initial estimate.
02
Inspection & deck survey
We assess timber condition, check moisture levels, and identify any boards needing replacement.
03
Sanding & board replacement
Multi-stage machine sanding removes splinters. Loose screws are tightened and damaged sections replaced.
04
Treatment & final review
Oil or silicon treatment is applied evenly. We review maintenance advice for maximum longevity.
Reference Projects
Our Projects
Explore reference projects and examples from Greater Gothenburg structured from initial state through working process to completed result.
Construction of 65 sqm timber deck in treated pine with concealed fasteners, perimeter border and custom staircase.
The project encompassed ground preparation, footing installation, and heavy-duty joist construction. Decking in 28x120 mm treated pine was installed using concealed fixings for a clean finish.
1. Before
Initial State
Initial state: Sloping uneven terrain requiring engineered framing.
2. Process
Working Process
Process: Concrete footings, support beams, and joist framework.
3. After
Completed Result
Completed result: Finished terrace deck with perimeter framing and stairs.
Custom glulam pergola with slatted privacy screen and matching decking platform.
Freestanding pergola anchored into deck framing using structural glulam timbers and integrated privacy slats.
1. Before
Initial State
Initial state: Exposed open deck area.
2. Process
Working Process
Process: Fitting structural posts and overhead glulam joists.
3. After
Completed Result
Completed result: Protected outdoor living space with natural finish.
Full apartment remodeling preserving period details, restoring original plank flooring, and architectural joinery.
Careful interior apartment remodeling: plaster skimming, ceiling painting, cornice repair, and floor restoration with hardwax oil.
1. Before
Initial State
Initial state: Damaged wallpaper and worn flooring.
2. Process
Working Process
Process: Plaster skimming, substrate prep, and timber trim fitting.
3. After
Completed Result
Completed result: Restored character with seamless modern finishes.
Authentic case studies and project photos are being assembled and updated continuously.
Why Choose Us
Why choose Dina Hantverkare?
Personal communication, clear quotes, and experienced craftsmen throughout your project in Gothenburg and surrounding areas.
— 01
Personal Contact
One clear point of contact throughout the project.
— 02
Clear Quote
We review scope and costs before work begins.
— 03
Experienced Craftsmen
Skilled team for renovation and construction.
— 04
Fully Insured
Peace of mind throughout the work with valid liability insurance.
— 05
ROT Deduction
ROT deduction according to current regulations directly on the invoice.
Tax Deduction
ROT Deduction According to Current Rules
As a private property owner, you can utilize the Swedish ROT tax deduction on eligible labour costs. We handle all administrative contact with Skatteverket and apply the deduction directly on your invoice.
Eligible Labour Costs
The deduction covers qualified carpentry, renovation, painting, flooring, and outdoor construction.
Direct on Invoice
No post-project paperwork or applications required on your end — we take care of the entire process.
Transparent Quote
Before we commence work, we clearly specify the labour cost, material cost, and net estimate.
FAQ
Frequently asked questions
Answers to common questions regarding process, quotes, and work in Gothenburg.
Can grooved decking boards be sanded?
Grooved or reeded decking cannot be sanded with belt or disc sanders without degrading the profile. Instead, we use mechanical rotary brushing and intensive cleaning to remove algae and dead wood fibers before oil treatment.
How often does a deck need sanding?
A professionally machine-sanded and oiled deck typically does not require re-sanding for 4–7 years, provided it is kept reasonably clean and receives a maintenance oiling every second or third year.
How does the ROT tax deduction apply to deck sanding?
Deck sanding and repair on a residential property qualify as maintenance and repair eligible for ROT tax deduction on labor costs. We handle the deduction directly on the invoice under current rules.
What is the difference between pressure washing and sanding decking?
High-pressure washing with incorrect nozzles shreds timber fibers, leaving a fuzzy surface that traps more moisture and generates sharp splinters. Sanding shears fibers smoothly, leaving a silky, splinter-free surface ideal for bare feet.
More services
Related work
Request Free quote
Contact us to learn more about our services or for a free initial assessment.